I wanted to add a websockify container with a remote-image on my mikrotik hapac2, wich i pushed to dockerhub before. My problem is that i can not run the container after adding the container. The status of the container is on "error".
The image link for the remote image is:
https://hub.docker.com/r/karayusuf29/we ... _arm_v7_32
To add the container i did this :
Code: Select all
/interface/veth/add name=veth1 address=192.168.1.150/24 gateway=192.168.1.1;
#creating bridge and assign the bridge an ip
/interface/bridge/add name=dockers;
/ip/address/add address=10.0.0.1/24 interface=dockers;
#connecting the veth-interface with the bridge
/interface/bridge/port add bridge=dockers interface=veth1;
#creating firewall
/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/16;
#creating environment and mounts parameters
/container/envs/add name=websockify_envs key=PASSWD value=letmein;
/container/mounts/add name=websockify_data src=disk1/docker/websockify_data dst=/data;
#is required for some containers to run a bit more stable
/container/config set ram=100
#is required for remote image
/container/config/set registry-url=https://registry-1.docker.io tmpdir=disk1/pull
#
/container/add remote-image=karayusuf29/websockify_docker_image_arm_v7_32 interface=veth1 root-dir=disk2/docker/websockify_root mounts=websockify_data envlist=websockify_envs logging=yes hostname=Websockif
What can i do to get the container running?