Hi all,
First, I know this is an unusual setup, sorry for this.
In the base configuration (Router 1), I have one Ethernet port and wlan2 on a bridge. Two further Ethernet ports in different subnets. So the Router 1 addresses are 192.168.197.1 (subnet 2), .198.1 (subnet 3), .199.1 (bridge).
"All" I want to do is a plug & play solution (both variants shall work), where any traffic is routed (wireless) to another router 2, that hosts basically the same configuration/subnets.
So on Router 1, I configured a static route to 0.0.0.0/0 to Router 2 and all traffic - if the default route (distance 0) is not active - is routed via this static route. All fine.
However, in the other direction I am missing a (maybe small) thing: From Router 2, I cannot access Router 1 (.197.1), as the default route (distance 0) is active, but I need a custom route. The default route cannot be deleted or distance changed. How can I route the traffic to Router 1?
Thank you,
Daniel