Hi,
Simple topology;
Conf Mikrotik x86 v7.5 ;
/interface vlan
add interface=bridge name=vlan1010 vlan-id=1010
/interface bridge
add ingress-filtering=no name=bridge vlan-filtering=yes
/interface bridge port
add bridge=bridge interface=ether2
add bridge=bridge interface=ether3
/interface bridge vlan
add bridge=bridge tagged=bridge,ether2,ether3 vlan-ids=1010
/ip dhcp-server
add address-pool=LAN_Pool disabled=yes interface=bridge name=DHCP
add address-pool=Guest_Poll interface=vlan1010 name=Guest
/ip dhcp-server network
add address=10.0.10.0/24 dns-server=8.8.8.8 gateway=\
10.0.10.1
add address=192.168.10.0/24 dns-server=8.8.8.8 gateway=\
192.168.10.1
/ip address
add address=XXX.XXX.XXX.XX comment=pubaddr interface=ether1 network=\
XXX.XXX.XXX.XX
add address=192.168.10.1/24 comment=Default_LAN interface=bridge network=\
192.168.10.0
add address=10.0.10.1/24 comment=vlan1010 interface=vlan1010 network=\
10.0.10.0
Qnap and other devices cannot get ip from vlan1010. Where am i doing wrong ?