- New devices with Hardware Offloaded Bridge VLAN Filtering -> https://help.mikrotik.com/docs/display/ ... witchchips in order to avoid CPU load.
- New devices like hAP AC2/3 or wAP AC -> https://help.mikrotik.com/docs/display/ ... switchchip with vlan-id to
Code: Select all
/interface ethernet switch
Now if this is correct, could someone explain the utility of adding a Bridge and the interfaces in the second case? Should work also without.
Code: Select all
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3