Community discussions

MikroTik App
 
User avatar
koolandrew
newbie
Topic Author
Posts: 28
Joined: Tue Dec 06, 2011 7:20 pm
Location: Toronto
Contact:

Bonding with two PPOE interfaces from the same ISP

Wed Nov 30, 2022 2:46 am

i have tried to add the bonding, but when i choose the ppoe1 and ppoe2 as the slaves for the bonding, i get an error stating that ppoe connections cannot be slaves?

I am not sure where to go next as i cannot find any documentation on this.

The isp has a multilink setup on their side, and assigned one static ip to both connections.

When i do a speed test, it is only using one link.

I cannot find any examples of bonding with ppoe, unless i am supposed to bond on the ethernet, as i really dont know.

Could someone kindly point me in the right direction.
 
tdw
Forum Guru
Forum Guru
Posts: 1841
Joined: Sat May 05, 2018 11:55 am

Re: Bonding with two PPOE interfaces from the same ISP

Wed Nov 30, 2022 2:49 pm

Ethernet bonding is not the same as PPPoE MultiLink. Likely you want this https://wiki.mikrotik.com/wiki/Manual:M ... iple_links
 
User avatar
koolandrew
newbie
Topic Author
Posts: 28
Joined: Tue Dec 06, 2011 7:20 pm
Location: Toronto
Contact:

Re: Bonding with two PPOE interfaces from the same ISP

Wed Nov 30, 2022 4:18 pm

Thanks very much, i have been searching for this, but obviously, the wrong topic.

Thanks again.

f

Who is online

Users browsing this forum: Bing [Bot], coreshock, Google [Bot], johnson73 and 70 guests