While hard coding the neighbors between the Mikrotik and Juniper did work, we have noticed another issue.
R1 <-> R2 <-> R3
R1 is the Juniper, connected to the world
R2 - CCR2216
R3 - CCR2004
R1 is advertising a default route through OSPF and OSPFv3
With dual stack and MPLS connected, R2 can ping everything and works great
R3 on the other hand, can ping R1 and R2 but as long as MPLS is active, it cannot ping anything through the default route
Ipv6 works fine on R3, no issues
I checked and MPLS does show a default route in the forwarding table, no firewall rules are currently added for troubleshooting purposes
0 L 16 main 0.0.0.0/0 { label=16; nh=100.76.0.86; interface=vlan3121 }
1 L 430 main ::/0 { label=429; nh=fe80::1afd:74ff:fec1:4a82%vlan3121; interface=vlan3121 }
{ label=429; nh=fe80::1afd:74ff:fec1:4a82%vlan3121; interface=vlan3121 }
R2
[admin@Core1] > /export
# jan/02/1970 05:15:10 by RouterOS 7.6
# software id = ZFSH-B6PD
#
# model = CCR2216-1G-12XS-2XQ
# serial number = HD8089JE5RM
/interface bridge
add name=LoopBack protocol-mode=none
/interface ethernet
set [ find default-name=qsfp28-1-1 ] l2mtu=2024 mtu=2000
set [ find default-name=qsfp28-2-1 ] l2mtu=2024 mtu=2000
/interface vlan
add comment="MX204" interface=qsfp28-1-1 mtu=2000 name=vlan903 vlan-id=903
add comment=AAA interface=qsfp28-1-1 mtu=2000 name=vlan3121 vlan-id=3121
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/port
set 0 name=serial0
/routing ospf instance
add disabled=no name=ospf-v2 router-id=100.78.0.7
add disabled=no name=ospf-v3 router-id=100.78.0.7 version=3
/routing ospf area
add disabled=no instance=ospf-v2 name=ospfv2
add disabled=no instance=ospf-v3 name=ospfv3
/ip address
add address=100.76.0.70/30 interface=vlan903 network=100.76.0.68
add address=100.78.0.7 interface=LoopBack network=100.78.0.7
add address=100.76.0.86/30 interface=vlan3121 network=100.76.0.84
/ipv6 address
add address=XXXX::76:17:2/112 advertise=no interface=vlan903
add address=XXXX::78:0:7/128 advertise=no interface=LoopBack
add address=XXXX::76:21:1/112 advertise=no interface=vlan3121
/mpls interface
add disabled=no input=yes interface=vlan903 mpls-mtu=2000
add disabled=no input=yes interface=vlan3121 mpls-mtu=2000
/mpls ldp
add afi=ip,ipv6 disabled=no distribute-for-default=yes lsr-id=100.78.0.7 transport-addresses=100.78.0.7,XXXX::78:0:7 vrf=main
/mpls ldp interface
add accept-dynamic-neighbors=no afi=ip,ipv6 disabled=no interface=vlan903 transport-addresses=""
add accept-dynamic-neighbors=yes afi=ip,ipv6 disabled=no interface=vlan3121 transport-addresses=""
/mpls ldp neighbor
add disabled=no send-targeted=yes transport=XXXX::78:0:4
/routing ospf interface-template
add area=ospfv2 disabled=no interfaces=LoopBack networks=100.78.0.7/32 passive
add area=ospfv3 disabled=no interfaces=LoopBack networks=XXXX::78:0:7/128 passive
add area=ospfv2 disabled=no interfaces=vlan903 networks=100.76.0.68/30 type=ptp
add area=ospfv3 disabled=no interfaces=vlan903 networks=XXXX::76:17:0/112 type=ptp
add area=ospfv2 disabled=no interfaces=vlan3121 networks=100.76.0.84/30 type=ptp
add area=ospfv3 disabled=no interfaces=vlan3121 networks=XXXX::76:21:0/112 type=ptp
/system identity
set name=Core1
/system logging
add topics=ldp,debug
/tool romon
set enabled=yes
[admin@Core1] >
R3
AAA[admin@AAA] > /export
# jan/02/1970 05:17:35 by RouterOS 7.6
# software id = GCWV-CMZC
#
# model = CCR2004-16G-2S+
# serial number = HD0083M7KBW
/interface bridge
add name=LoopBack protocol-mode=none
/interface ethernet
set [ find default-name=ether1 ] l2mtu=2024 mtu=2000
/interface vlan
add interface=ether1 mtu=2000 name=vlan3121 vlan-id=3121
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/port
set 0 name=serial0
set 1 name=serial1
/routing ospf instance
add disabled=no name=ospfv2 router-id=100.78.0.16
add disabled=no name=ospfv3 router-id=100.78.0.16 version=3
/routing ospf area
add disabled=no instance=ospfv2 name=ospf-v2
add disabled=no instance=ospfv3 name=ospf-v3
/ip address
add address=100.76.0.85/30 interface=vlan3121 network=100.76.0.84
add address=100.78.0.16 interface=LoopBack network=100.78.0.16
/ipv6 address
add address=XXXX::76:21:2/112 advertise=no interface=vlan3121
add address=XXXX::78:0:16/128 advertise=no interface=LoopBack
/mpls interface
add disabled=no input=yes interface=vlan3121 mpls-mtu=2000
/mpls ldp
add afi=ip,ipv6 disabled=no distribute-for-default=no lsr-id=100.78.0.16 transport-addresses=100.78.0.16,XXXX::78:0:16 vrf=main
/mpls ldp interface
add accept-dynamic-neighbors=yes afi=ip,ipv6 disabled=no interface=vlan3121 transport-addresses=""
/routing ospf interface-template
add area=ospf-v2 disabled=no interfaces=LoopBack networks=100.78.0.16/32 passive
add area=ospf-v3 disabled=no interfaces=LoopBack networks=XXXX::78:0:16/128 passive
add area=ospf-v2 disabled=no interfaces=vlan3121 networks=100.76.0.84/30 type=ptp
add area=ospf-v3 disabled=no interfaces=vlan3121 networks=XXXX::76:21:0/112 type=ptp
/system identity
set name=AAA
/tool romon
set enabled=yes