Howdy everyone. I own an Apiary and we have a large property with a single tower with Starlink and a bridged wisp style distribution. For 3 years I had a 3 radio PTMP bridged setup and it worked well, suddenly I could get my vlans everywhere. After while I started getting more hardware that I needed local access to at one of the locations and got tired of everything taking a ride over the wireless to get to my router to then come back to the same location. So I decided I needed to convert over to L3 "islands" so if my link to my tower (where the current "router on a stick" is) goes down I don't lose access to all my local hardware on other vlans. I have mocked it all up in eve-ng but the problem is eve-ng wont let me create a wireless link using the mikrotik vROS image, nor will it let me assign 2 devices to a single link so I had to create a fake "hub" to simulate the ptmp as best I could.
I have 2 netbox5s and a SXTsq5 with one large bridges network
This is what I am trying to achieve
This is what I simulated in eve-ng using what I could but only ethernet links. I have a level 4 license for the main tower, and the other 2 have level 3 licenses and for the moment are configured as a WISP AP for the main and CPE for the 2 satellite locations. Once I start reconfiguring everything my internet is toast until I am done so I need to get my procedure right, before I start or I am going to make some people I live with pretty unhappy.
Can I leave the radio config as is, but just configure addresses for each interface and simply put in static routes like they are ethernet interfaces?