I have the following setup.
RB3011UiAS-RM, which functions as modem and router
Mikrotik 24 port gigabit switch
hEX PoE on the attic connected to cAP AC through PoE
On PS5 speedtest will give me:
On a wired connection I get 44.8Mbps down and 13.4Mbps up
On a wireless connection 44.4Mbps down and 13.3Mbps up
It defaults on 2.4Ghz
Distance from PS5 to cAP AC is about 3m in a wooden house.
The connection speed seems pretty solid (for my 100/40 Mbps VDSL line). Only while gaming on the wifi, every so many minutes there are lag spikes noticeable.
Using the ethernet cable is rock solid.
Does anyone have a clue what this could cause?
Code: Select all
# dec/13/2022 20:13:38 by RouterOS 6.47
# software id = NR26-H0VF
#
# model = RouterBOARD 3011UiAS
# serial number = 8EED091AFE28
/caps-man channel
add band=2ghz-g/n control-channel-width=20mhz frequency=2412 name=\
2.4Ghz_channel1
add band=2ghz-g/n control-channel-width=20mhz frequency=2437 name=\
2.4Ghz_channel6
add band=5ghz-a/n/ac control-channel-width=20mhz extension-channel=Ceee \
frequency=5180 name=5Ghz_channel36
/interface bridge
add admin-mac=B8:69:F4:F1:D4:26 ageing-time=1h auto-mac=no comment=defconf \
name=bridge
add name=bridge_guest
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
set [ find default-name=ether2 ] speed=100Mbps
set [ find default-name=ether3 ] speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] speed=100Mbps
set [ find default-name=ether6 ] speed=100Mbps
set [ find default-name=ether7 ] speed=100Mbps
set [ find default-name=ether8 ] speed=100Mbps
set [ find default-name=ether9 ] speed=100Mbps
set [ find default-name=ether10 ] speed=100Mbps
set [ find default-name=sfp1 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 user=\
**@EDPNET
/caps-man datapath
add bridge=bridge client-to-client-forwarding=yes local-forwarding=yes name=\
datapath_Main
add bridge=bridge_guest name=datapath_Guest
/caps-man configuration
add country=belgium datapath=datapath_Guest mode=ap name=Configuration_Guest \
ssid="Wireless Guest Network"
/caps-man rates
add basic=6Mbps name="GN Only - No B rates" supported=\
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
/caps-man security
add authentication-types=wpa2-psk disable-pmkid=yes encryption=aes-ccm name=\
security_Main
/caps-man configuration
add country=belgium datapath=datapath_Main mode=ap name=\
"Configuration Main 2.4Ghz" rates="GN Only - No B rates" security=\
security_Main ssid="Wireless Main Network"
add country=belgium datapath=datapath_Main mode=ap name=\
"Configuration Main 5Ghz" security=security_Main ssid=\
"Wireless Main Network"
/caps-man interface
add channel=2.4Ghz_channel1 configuration="Configuration Main 2.4Ghz" \
datapath=datapath_Main disabled=no l2mtu=1600 mac-address=\
CC:2D:E0:96:00:9C master-interface=none name=2.4GHz--MikroTik-1 \
radio-mac=CC:2D:E0:96:00:9C radio-name=CC2DE096009C rates=\
"GN Only - No B rates"
add channel=5Ghz_channel36 configuration="Configuration Main 5Ghz" datapath=\
datapath_Main disabled=no l2mtu=1600 mac-address=CC:2D:E0:96:00:9D \
master-interface=none name=5GHz--MikroTik-1 radio-mac=CC:2D:E0:96:00:9D \
radio-name=CC2DE096009D
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=10.10.1.100-10.10.1.200
add name=dhcp_guest ranges=10.10.2.100-10.10.2.200
add name=dhcp_pool2 ranges=10.10.2.2-10.10.2.254
add name=vpn ranges=192.168.89.2-192.168.89.255
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge lease-time=1h name=defconf
add address-pool=dhcp_pool2 disabled=no interface=bridge_guest name=\
dhcp_guest
/ppp profile
add bridge=bridge name=TimoVPN
set *FFFFFFFE local-address=192.168.89.1 remote-address=vpn
/queue type
add kind=pcq name=pcq_guest_download pcq-classifier=dst-address pcq-rate=2M
add kind=pcq name=pcq_guest_upload pcq-classifier=src-address pcq-rate=512k
/queue simple
add name=limit_guest queue=pcq_guest_upload/pcq_guest_download target=\
10.10.2.0/24
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,tikapp"
add name=homeassistant policy="read,test,api,!local,!telnet,!ssh,!ftp,!reboot,\
!write,!policy,!winbox,!password,!web,!sniff,!sensitive,!romon,!dude,!tika\
pp"
/caps-man access-list
add action=reject allow-signal-out-of-range=10s disabled=yes signal-range=\
-120..-70 ssid-regexp="" time=0s-1d,sun,mon,tue,wed,thu,fri,sat
add action=accept allow-signal-out-of-range=10s disabled=yes signal-range=\
-69..120 ssid-regexp="" time=0s-1d,sun,mon,tue,wed,thu,fri,sat
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-enabled comment="2.4GHz 802.11 capable devices" \
hw-supported-modes=g master-configuration="Configuration Main 2.4Ghz" \
name-format=prefix-identity name-prefix=2.4GHz-
add action=create-enabled comment="5GHz 802.11ac capable radios" \
hw-supported-modes=ac master-configuration="Configuration Main 5Ghz" \
name-format=prefix-identity name-prefix=5GHz-
/interface bridge port
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=ether6
add bridge=bridge comment=defconf interface=ether7
add bridge=bridge comment=defconf interface=ether8
add bridge=bridge comment=defconf interface=ether9
add bridge=bridge comment=defconf interface=ether10
add bridge=bridge comment=defconf interface=sfp1
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface l2tp-server server
set enabled=yes use-ipsec=yes
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=pppoe-out1 list=WAN
/interface pptp-server server
set authentication=pap,chap,mschap1,mschap2 enabled=yes
/interface sstp-server server
set default-profile=default-encryption enabled=yes
/ip address
add address=10.10.1.1/24 comment=defconf interface=ether2 network=10.10.1.0
add address=10.10.2.1/24 interface=bridge_guest network=10.10.2.0
/ip cloud
set ddns-enabled=yes ddns-update-interval=1h
/ip dhcp-client
add comment=defconf interface=ether1 use-peer-dns=no
/ip dhcp-server lease
add address=10.10.1.2 client-id=1:b8:69:f4:fe:3:3e comment=\
"Mikrotik 24-port gigabit switch" mac-address=B8:69:F4:FE:03:3E server=\
defconf
add address=10.10.1.10 client-id=1:0:11:32:8a:15:17 comment="Synology NAS" \
mac-address=00:11:32:8A:15:17 server=defconf
add address=10.10.1.11 client-id=1:28:6d:97:70:de:68 comment=\
"SmartThings Hub" mac-address=28:6D:97:70:DE:68 server=defconf
add address=10.10.1.3 client-id=1:cc:2d:e0:96:0:9a comment="Mikrotik cAP 1" \
mac-address=CC:2D:E0:96:00:9A server=defconf
add address=10.10.1.20 comment="Google Home Max Basement" mac-address=\
E4:F0:42:0E:82:AD server=defconf
add address=10.10.1.70 comment="Xiaomi Vac" mac-address=40:31:3C:AE:40:FA \
server=defconf
add address=10.10.1.84 client-id=1:0:12:17:8b:8d:2a comment="Shitty Ali Cam" \
mac-address=00:12:17:8B:8D:2A server=defconf
add address=10.10.1.12 comment="Philips Hue Hub" mac-address=\
00:17:88:6D:23:10 server=defconf
add address=10.10.1.23 client-id=1:30:d1:6b:79:ac:23 comment=\
"Lenovo Smart Display 7\"" mac-address=30:D1:6B:79:AC:23 server=defconf
add address=10.10.1.5 client-id=1:74:4d:28:84:17:6b comment=\
"Mikrotik POE switch" mac-address=74:4D:28:84:17:6B server=defconf
add address=10.10.1.85 client-id=1:ec:71:db:cd:52:c4 comment=Reolink1 \
mac-address=EC:71:DB:CD:52:C4 server=defconf
add address=10.10.1.30 comment="Irrigation Controller 1" mac-address=\
60:01:94:CD:FA:EF server=defconf
add address=10.10.1.31 comment="Irrigation Controller 2" mac-address=\
60:01:94:CE:07:40 server=defconf
add address=10.10.1.32 comment="Irrigation Controller 3" mac-address=\
60:01:94:CE:09:48 server=defconf
add address=10.10.1.21 always-broadcast=yes client-id=1:3c:95:9:e3:af:fb \
comment=TimoTv mac-address=3C:95:09:E3:AF:FB server=defconf
add address=10.10.1.22 client-id=1:30:d1:6b:aa:ac:1d comment=\
"Lenovo Smart Display 10\"" mac-address=30:D1:6B:AA:AC:1D server=defconf
add address=10.10.1.25 comment="Bathroom speaker" mac-address=\
F4:F5:D8:BF:5B:FA server=defconf
add address=10.10.1.24 comment="Basement speaker" mac-address=\
38:8B:59:AD:6D:80 server=defconf
add address=10.10.1.27 mac-address=20:DF:B9:8E:F5:00 server=defconf
add address=10.10.1.40 comment="Ring doorbell" mac-address=34:15:13:BB:95:B7 \
server=defconf
add address=10.10.1.26 comment="Living Room Speaker" mac-address=\
48:D6:D5:C8:69:22 server=defconf
add address=10.10.1.35 comment=Shelly4ProModule2 mac-address=\
E4:15:F6:4D:0C:E6 server=defconf
add address=10.10.1.36 comment=Shelly4ProModule1 mac-address=\
E4:15:F6:4D:11:50 server=defconf
add address=10.10.1.86 client-id=1:0:62:6e:6a:6a:bf comment=\
"Foscam Project Area" mac-address=00:62:6E:6A:6A:BF server=defconf
add address=10.10.1.13 client-id=1:50:ec:50:ed:14:cc comment=\
"Xiaomi Aqara Hub" mac-address=50:EC:50:ED:14:CC server=defconf
add address=10.10.1.41 mac-address=98:F4:AB:65:0C:F8 server=defconf
add address=10.10.1.15 comment="Home Assistant" mac-address=00:1E:06:42:DE:E7 \
server=defconf
add address=10.10.1.38 mac-address=24:62:AB:B0:61:68 server=defconf
add address=10.10.1.72 mac-address=54:48:E6:55:27:3B server=defconf
add address=10.10.1.80 client-id=1:ec:71:db:a6:ec:2c comment=\
"Reolink 16port NVR" mac-address=EC:71:DB:A6:EC:2C server=defconf
add address=10.10.1.71 mac-address=54:48:E6:04:27:81 server=defconf
add address=10.10.1.42 comment=Kerstboom mac-address=E8:DB:84:0E:01:20 \
server=defconf
add address=10.10.1.14 client-id=1:0:11:2a:22:ea:7b comment=\
"Niko Home Control" mac-address=00:11:2A:22:EA:7B server=defconf
add address=10.10.1.81 client-id=1:ec:71:db:90:45:e7 comment=\
"Reolink voordeur" mac-address=EC:71:DB:90:45:E7 server=defconf
/ip dhcp-server network
add address=10.10.1.0/24 gateway=10.10.1.1 netmask=24
add address=10.10.2.0/24 gateway=10.10.2.1
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8
/ip dns static
add address=10.10.1.1 name=router.lan type=A
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=accept chain=input comment="allow IPsec NAT" dst-port=4500 \
protocol=udp
add action=accept chain=input comment="allow IKE" dst-port=500 protocol=udp
add action=accept chain=input comment="allow l2tp" dst-port=1701 protocol=udp
add action=accept chain=input comment="allow pptp" dst-port=1723 protocol=tcp
add action=accept chain=input comment="allow sstp" dst-port=443 protocol=tcp
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
disabled=yes in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related disabled=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
add action=drop chain=forward comment="Block guest from main" dst-address=\
10.10.1.0/24 src-address=10.10.2.0/24
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment="Forward to HASS" dst-address=\
!10.10.1.1 dst-address-type=local dst-port=8123 protocol=tcp \
to-addresses=10.10.1.10 to-ports=8123
add action=masquerade chain=srcnat comment="Hairpin for NAS" dst-address=\
10.10.1.10 src-address=10.10.1.0/24
add action=dst-nat chain=dstnat comment="Forward to Synology" dst-address=\
!10.10.1.1 dst-address-type=local dst-port=8080 protocol=tcp \
to-addresses=10.10.1.10 to-ports=5000
add action=dst-nat chain=dstnat comment="Forward to PLEX" dst-address=\
!10.10.1.10 dst-port=32400 protocol=tcp to-addresses=10.10.1.10 to-ports=\
32400
add action=masquerade chain=srcnat comment="masq. vpn traffic" src-address=\
192.168.89.0/24
add action=dst-nat chain=dstnat comment="Minecraft forward" disabled=yes \
dst-address=!10.10.1.1 dst-port=25565 protocol=tcp to-addresses=\
10.10.1.180 to-ports=25565
add action=dst-nat chain=dstnat comment=Reolink disabled=yes dst-address=\
!10.10.1.1 dst-address-type=local dst-port=1234 protocol=tcp \
to-addresses=10.10.1.80 to-ports=80
add action=dst-nat chain=dstnat comment="HASS FTP" disabled=yes dst-address=\
!10.10.1.1 dst-address-type=local dst-port=21 protocol=tcp to-addresses=\
10.10.1.15 to-ports=21
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/ip upnp
set enabled=yes
/ppp secret
add name=*** profile=**VPN
add name=vpn profile=default-encryption
/system clock
set time-zone-name=Europe/Brussels
/system identity
set name="MikroTik Router"
/tool bandwidth-server
set authenticate=no
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN