I have a question for those that have tried to connect a Cisco wireless lan controller to a Mikrotik switch
In the Cisco world a wireless lan controller would connect to a distribution cisco switch in this way:
Code: Select all
Int Gi0/1
switchport
channel-group 1 mode on
no shut
Int Gi0/2
switchport
channel-group 1 mode on
no shut
interface port-channel 1
switchport
switchport trunk encap dot1q
switchport trunk native vlan 301
switchport trunk allowed vlan all
switchport mode trunk
no shutdown
The topology I have is the one attached to this message, let me know please if you had the same issues and how did you solve to connect a Cisco wireless lan controller to a RouterOS switch like CRS328, the one I have.