Community discussions

MikroTik App
 
Broesel
just joined
Topic Author
Posts: 1
Joined: Thu Dec 29, 2022 5:26 pm

Router OS 7 broke Mesh

Thu Dec 29, 2022 6:13 pm

Hi,

had a Network running WDS Mesh fine with ROS 6, now updated to 7.7rc3 and Mesh broke down.
Connects, and keeps disconnecting after 1 Minute:

wlan1: failed to set bridge port for wlan1, reason: std failure: timeout (13)
64:D1:54:B2:19:5E@wlan1: disconnected, no beacons received, signal strength -53


As soon as i use a "normal" bridge, and just use "dynamic" instead of "dynamic mesh" for WDS the connection is fine.

Any ideas whats wrong here?

Best reagrds,
Broesel
 
piotr0777
just joined
Posts: 1
Joined: Sun Jan 22, 2023 4:39 am

Re: Router OS 7 broke Mesh

Sun Jan 22, 2023 4:40 am

I seem to have the same issue. Any luck solving it?
 
MasterCATZ
just joined
Posts: 15
Joined: Sat Apr 21, 2012 7:31 am

Re: Router OS 7 broke Mesh

Sat Sep 02, 2023 7:39 am

anyone else gotten working ?

mine used to work a treat with the 1x unit with Wired Connection PTP Bridge CPE and all the others PTP Bridge AP ,
but then they changed the "Quick Set" to only do 5ghz band , and that rendered all the IOT devices unable to have a wifi connection

only other option was "Home AP Dual" , but that did not help me

and "Home Mesh" completely broke everything

the config will not save unless you manually set Local network an IP Adress rendering the Internet Automatic from a DHCP useless


and it creates using CAPsMAN instead of using MESH ? and CAPsMAN requires every device to be wired ?

and the wireless interfaces have no supported channels set ?

Who is online

Users browsing this forum: No registered users and 12 guests