We extensively use PPTP client in ROS 6.
Don't ask why. Yes, I feel ashamed, no I cannot stop using it.
And for a number of reasons I want to upgrade to ROS 7.
I am OK with the big red warning in ROS7 saying that PPTP is substandard. I agree, it is.
But it does not work.
This is what we have:
/interface pptp-client
add allow=mschap2 connect-to=xx.xx.xx.xx disabled=no \
name=pptp-out1 user=xxxxxx password=xxxxxx
No firewall. Nothing else, just an IP address on a single ethernet interface and a gateway set.
It works in 6. It doesn't in 7.
Tried in RB2011, RB3011, RB433, hap ac lite, hap ac2, RBLHGR, vmware/x86. I will try on RBLHGGR as soon as it arrives (well, probably not, I got the message already).
It is the same on any hardware - works in 6, fails in 7.
What I get in the log:
jan/02/1970 00:09:54 system,info route 0.0.0.0 added by admin
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: initializing...
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: connecting...
jan/02/1970 00:14:06 system,info device added by admin
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: terminating...
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: disconnected
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: initializing...
jan/02/1970 00:14:06 pptp,ppp,info pptp-out1: connecting...
jan/02/1970 00:14:07 pptp,ppp,info pptp-out1: terminating...
jan/02/1970 00:14:07 pptp,ppp,info pptp-out1: disconnected
Where to debug next?