At first I ran into the problem that in the new version of the OS it is impossible to add table routing by creating a mangle rule. Routing table must be created in advance in the menu Routing - Tables.
I created some Mangle rules like
Created a new route for mangle rules.
And when I turn on the rules, I encounter a DNS error on the computer, which I forcibly send to WAN2
In version RouterOS6.4, these rules worked correctly for me and DNS was taken from the Mikrotik itself.
But in 7.5 this does not happen.
Until I manually specify the WAN2 DNS on the computer that I forcibly redirect to WAN2, the sites do not work.
And the local address specified by the computer becomes inaccessible from the same subnet to other computers.
As if the port is directly redirected to WAN2.
Like VLAN.
How to use mangle rules correctly in this scheme and tell him to use DNS Mikrotik?
DNS at me are specified manually.
My mikrotik is a local DNS server.
Allow remote request enabled
I tried to add DNS WAN2 manually as an additional one - it did not solve the problem.
Be grateful for advice.
Thanks in advance.
