Hello,
I'm using v7.7 on a RB5009 (arm64) device.
I have successfully configured the device in Zerotier, and can remotely manage the RB5009 with it's Zerotire IP address from a Zerotier joined device.
The Issue I face is that from a Zerotier joined device, I can not reach a device on the LAN side of the RB5009.
this is the output of /ip/route/print
Flags: D - DYNAMIC; A - ACTIVE; c, d, v, y - COPY
Columns: DST-ADDRESS, GATEWAY, DISTANCE
DST-ADDRESS GATEWAY DISTANCE
DAd 0.0.0.0/0 192.168.118.1 1
DAv 10.128.0.0/24 192.168.42.1 1
DAv 10.128.32.0/24 192.168.42.2 1
DAc 10.128.64.0/24 Bridge_LAN 0
DAc 192.168.42.0/24 zerotier1 0
DAc 192.168.118.0/24 ether1_WAN 0
The LAN side is here 10.128.64.0/24, the IP of the rb5009 on Zerotier is 192.168.42.3.
A tracert from the Zerotier client (192.168.42.124) to the the LAN client (10.128.64.250) show this:
Tracing route to 10.128.64.250 over a maximum of 30 hops
1 24 ms 26 ms 36 ms 192.168.42.3
2 * * * Request timed out.
A tracert from the LAN client (10.128.64.250) to the Zerotier client (192.168.42.124) show this:
Tracing route to 10.128.64.250 over a maximum of 30 hops
1 1 ms 1 ms 1 ms 10.128.64.1
2 * * * Request timed out.
All firewall rules are disabled
Any Insight would be appreciated.
Kind regards,
Hans