In
Tools->Netwatch add a new host
+
Set the IP to monitor in the
host field.
Under
Down add the vlan to be down/uplike this:
interface/vlan/set vlan10 disabled=yes
interface/vlan/set vlan20 disabled=no
Under Up reverse the down
interface/vlan/set vlan10 disabled=no
interface/vlan/set vlan20 disabled=yes
NB, you can not use an IP that need the vlan to be monitored. How should it then ever enable the vlan.
----------------------------------------------------------------------------------------
Use
Splunk> to log/monitor your
MikroTik Router(s). See link below.
MikroTik->Splunk