I need hints on how to configure wifi to get satisfactory transfers.
Here are my iperf3 results on the local network:
Code: Select all
Connecting to host 192.168.3.33, port 5201
[ 4] local 192.168.4.253 port 63445 connected to 192.168.3.33 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 45.0 MBytes 377 Mbits/sec
[ 4] 1.00-2.00 sec 51.4 MBytes 431 Mbits/sec
[ 4] 2.00-3.01 sec 51.0 MBytes 425 Mbits/sec
[ 4] 3.01-4.00 sec 48.0 MBytes 405 Mbits/sec
[ 4] 4.00-5.00 sec 48.2 MBytes 405 Mbits/sec
[ 4] 5.00-6.00 sec 45.0 MBytes 378 Mbits/sec
[ 4] 6.00-7.00 sec 48.2 MBytes 405 Mbits/sec
[ 4] 7.00-8.00 sec 49.4 MBytes 414 Mbits/sec
[ 4] 8.00-9.00 sec 46.8 MBytes 392 Mbits/sec
[ 4] 9.00-10.00 sec 48.0 MBytes 403 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 481 MBytes 403 Mbits/sec sender
[ 4] 0.00-10.00 sec 481 MBytes 403 Mbits/sec receiver
The network card on the local computer is an Intel(R) Wi-Fi 6E AX210 160MHz.0 name="wifi-2g" mac-address=48:A9:8A:05:13:9E arp-timeout=auto
radio-mac=48:A9:8A:05:13:9E
configuration.mode=ap .ssid="Dom_" .country=Poland .manager=local
security.authentication-types=wpa2-psk,wpa3-psk .passphrase="xxx"
.wps=disable
channel.band=2ghz-ax .width=20/40mhz .skip-dfs-channels=all
1 name="wifi-5g" mac-address=48:A9:8A:05:13:9D arp-timeout=auto
radio-mac=48:A9:8A:05:13:9D
configuration.mode=ap .ssid="Dom_" .country=Poland .manager=local
security.authentication-types=wpa2-psk,wpa3-psk .passphrase="xxx"
.wps=disable
channel.band=5ghz-ax .width=20/40/80mhz .skip-dfs-channels=all
Windows shows connection at 1201/1201 (Mbps), distance from the router is about 2m.