So yeah finally got DHCP working.
Now my config is not good anymore.
So i wanted to import the default config from https://help.mikrotik.com/docs/display/ ... igurations
I have a MikroTik HAP AX3 v7.7 stable.
I have copy paste all the text from the script in "AP Router" because thats the one for hAP products to a txt file.
I have renamed the txt to Default.rsc.
WINBOX: Uploaded it to files.
When i import it with Winbox -> New Terminal it says "Syntax error (line 4 column 19)"
If i check that line and column it sees a ":" after the word "script". (see screenshot SyntaxError.png)
I removed the ":", now it says line error at line 223 column 19.
If i check that line and column it sees a ":" after the word "caps-mode-script".
I removed the ":", now it says line error at line 318 column 19.
If i check that line and column it sees a ":" after the word "custom-script".
I removed the ":", now it says line error at line 4 column 13.
If i check that line and column it sees a "s" it's the s from the word "script".
So removing those ":" does not work.
How do i import the defaulft config? What should be the correct default config?
Also i bought this with 7.6 with a lot of issues, i installed 7.7 with netinstall but that default config has almost nothing, only ether1to5, no bridge, no wifi etc.
If i do a reset config without ticking the box "No default Configuration" it will only give me the config with almost nothing only ether1to5, no bridge, no wifi etc.