I'm having a problem with hAP ax2 again, this time is problem with link speed.
So i noticed that my internet speed dropped from 180/140 to 92/93 Mbps and at first i thought that ISP is limiting speed but then today i discovered that link speed between ubiquiti antenna and mikrotik is only 100 Mbps ? With hAP ac3 i had 1 Gbps link speed.
Also link between two hAP ax2 is also just 100 Mbps instead of 1 Gbps and such problems didn't exist with hAP ac3...
This is terminal output for link between router and AP downstairs:
Code: Select all
;;; Trunk port (Uplink na hAP_ax2_DB)
name: ether2
status: link-ok
auto-negotiation: done
rate: 100Mbps
full-duplex: yes
tx-flow-control: no
rx-flow-control: no
advertising: 10M-half,10M-full,100M-half,100M-full
link-partner-advertising: 10M-half,10M-full,100M-half,100M-full
Code: Select all
;;; WAN (Sa vanj.antene)
name: ether1
status: link-ok
auto-negotiation: done
rate: 100Mbps
full-duplex: yes
tx-flow-control: no
rx-flow-control: no
advertising: 10M-half,10M-full,100M-half,100M-full
link-partner-advertising: 10M-half,10M-full,100M-half,100M-full