Hope you are doing well.
I configured my Mikrotik hex lite RB with the below, it worked normally with all the configurations.
Code: Select all
# feb/20/2023 14:30:16 by RouterOS 6.45.9
# software id = C10M-FSIX
#
# model = RB750r2
# serial number =
/interface bridge
add name=private-ip-lan protocol-mode=none
add name=public-ip-lan protocol-mode=none
/interface pppoe-client
add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 password=XXXXXXXXXXX use-peer-dns=yes user=F126580@ogeronet-2M.com
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=private-ip-lan interface=ether2
add bridge=public-ip-lan interface=ether3
/ip address
add address=192.168.88.1/24 interface=private-ip-lan network=192.168.88.0
add address=public-IP/29 interface=public-ip-lan network=public-IP-network
/ip firewall filter
add chain=input protocol=icmp
add chain=input connection-state=established
add chain=input connection-state=related
add action=drop chain=input in-interface=pppoe-out1
add chain=input comment="permit incoming RIP packets" dst-port=520 in-interface=pppoe-out1 protocol=udp
add action=drop chain=input
add action=fasttrack-connection chain=forward connection-state=established,related
add chain=forward connection-state=established,related
add action=drop chain=forward connection-state=invalid
add chain=forward in-interface=public-ip-lan
add chain=forward in-interface=private-ip-lan
add action=drop chain=forward
/ip firewall nat
add action=masquerade chain=srcnat out-interface=pppoe-out1 src-address=192.168.88.0/24
/routing prefix-lists
add chain=output prefix=public-IP-network/32 prefix-length=29
add action=discard chain=output prefix=0.0.0.0/32 prefix-length=0
/routing rip
set redistribute-connected=yes
/routing rip interface
add interface=pppoe-out1 out-prefix-list=output receive=v2
/routing rip network
add
/system clock
set time-zone-name=Asia/Beirut
Can you please help me to solve this issue?
Best Regards,