Community discussions

MikroTik App
 
scottc19
just joined
Topic Author
Posts: 4
Joined: Thu Feb 23, 2023 11:57 pm

PTP with 2.4ghz and 5ghz at the same time?

Fri Feb 24, 2023 8:29 pm

Is it possible to create a PTP connection on both 2.4ghz and 5ghz at the same time? If so would it look the following or a different config?

Device 1 - mANTBox 52 15s:
create Bridge wlan1 + wlan2 + ethernet
wlan1 mode: bridge 2.4ghz
wlan2 mode bridge 5ghz

Device 2 - mANTBox 52 15s:
create Bridge wlan1 + wlan2 + ethernet
wlan1 mode: station bridge 2.4ghz
wlan2 mode station bridge 5ghz
 
scottc19
just joined
Topic Author
Posts: 4
Joined: Thu Feb 23, 2023 11:57 pm

Re: PTP with 2.4ghz and 5ghz at the same time?

Fri Feb 24, 2023 9:42 pm

I tried to setup it up, but if both are enabled so far it just uses wlan1, guessing its running in essentially fallback mode and not dual mode if such thing exists.
 
User avatar
bpwl
Forum Guru
Forum Guru
Posts: 2984
Joined: Mon Apr 08, 2019 1:16 am

Re: PTP with 2.4ghz and 5ghz at the same time?

Sat Feb 25, 2023 2:14 am

Who is online

Users browsing this forum: No registered users and 27 guests