Community discussions

MikroTik App
 
Moc
just joined
Topic Author
Posts: 18
Joined: Sun Jan 06, 2013 8:47 am

VRRP Setup Question

Sat Mar 04, 2023 10:42 pm

I'm trying to setup 2 router in redundant on the internet. Here the example of the setup :
Interface vlan100
Internal IP for VRRP Negociation on vlan100 : RT1 : 172.16.9.1/30 RT2: 172.16.9.2/30
The Public IP Shared is : 70.3.3.1/24 which is set on the vrrp-vlan100 interface

Now, this normally work for me, but in this case, I have on the router another bonded IP address which is 70.3.3.99/24 (It configured on both with a port forward).

Everytime I seem to set this up in production, it work for a few seconds, then nothing ping or single IP ping.

I tried assigning both ip to the vrrp interface, or just 1 of the two, leave the other on vlan100 directly. I tried making the IP inside the vrrp set to /32 when the interface had another in the same range like it seem to say in the documentations. I tried creating a different vrrp interface for both IP address on vlan100 and that didn't work neither !

I'm a little bit lost at this point !

Who is online

Users browsing this forum: No registered users and 33 guests