Community discussions

MikroTik App
 
pmurdock
newbie
Topic Author
Posts: 43
Joined: Sun Jul 03, 2005 7:39 am
Location: Herriman, Utah
Contact:

ROSv7 - filters (dynamic-in, connected-in)

Thu Mar 16, 2023 5:29 am

I would like to selectively turn off L3HW offloading connected and dynamic routes in a CCR2216.. In the past in ROS6 I would have used the chains dynamic-in and connected-in to modify route entries before they made it to the table.. I have been struggling to do this on ROS7.. I added a filter like this

[admin@HCN/Core/CCR2216] /routing/filter/rule> print
Flags: X - disabled, I - inactive
0 chain=connected-in rule="if (protocol connected && dst in 100.69.0.0/16) {set suppress-hw-offload yes; accept}"


but this does not do anything.. of course, what isn't clear to me is that connected-in and dynamic-in are chains anymore as they don't appear in the drop down.. however it does appear I can create them, but I don't think ROS7 is using them?

cheers,
Paul

Who is online

Users browsing this forum: Ahrefs [Bot], VinceKalloe and 75 guests