https://ibb.co/1Qzm9YX
So our aim is to have the Mikrotik to join our existing wireguard network, and also have that the PC attached to the Mikrotik to join the same wireguard, without the need to install a wireguard client on the PC: the reason here is that the "PC" will be actually a stupid device where we cannot install wireguard: imagine the "PC" it is a webcam connected to the Mikrotik by DHCP, or with a fixed IP): note that we are aware we can have the "PC" attached to the mikrotik able to access the wireguard by using a dedicated subnet (mikrotik on
Code: Select all
192.168.88.1
Code: Select all
192.168.88.2
Code: Select all
10.77.1.152
Code: Select all
192.168.88.2
The question is: is this possible?
We are able, of course, to have the mikrotik join the wirguard: e.g. from the "Laptop" (and all other peers connected to the Wireguard) we are able to successfully reach the Mikrotik at http://10.77.1.151
The peer configuration in the Wireguard server 10.77.1.1 is set to allow the Mikrotik peers to have both 10.77.1.151 and 10.77.1.152, so we are able, for example, to assign the IP
Code: Select all
10.77.1.152
Code: Select all
10.77.1.152
Thanks in advance for your help!
here another copy of the above image in case the above get removed:
https://ibb.co/1Qzm9YX