Hello!
I have a very simple question (I'm sorry Im not a networking expert):
I have an ISP provider that gave me something like this:
VLAN: 510
Comunication IP: 10.100.10.122/30
Gateway: 10.100.10.121
Public IP: 42.230.20.38
I want to use the port eth1 as my WAN, but I dont now what to do with the Public IP.
I saw from other post that I need to do something like this:
/interface vlan
add name=wan interface=ether1 vlan-id=510
/ip address
add address=10.100.10.122/30 interface=wan
/ip route
add dst-address=0.0.0.0/0 gateway=10.100.10.121
Is that ok?
What else do I need? Because I'm missing the public IP configuration on my Mikrotik router (MikroTik RB941-2nD) and I need gain acces from outside using the public IP and obviously I need give Internet access to my router
Thanks in advance