Here is my config:
Code: Select all
# mar/17/2023 12:47:13 by RouterOS 6.49.6
# software id = W0T5-PBGI
#
# model = RouterBOARD 750 r2
# serial number = 67D306B9A00A
/interface bridge
add admin-mac=6C:3B:6B:C6:43:18 auto-mac=no comment=defconf name=bridge
/interface pppoe-client
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.0.10-192.168.3.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=pppoe-out1 list=WAN
/ip address
add address=192.168.0.1/22 comment=defconf interface=bridge network=\
192.168.0.0
/ip cloud
set ddns-enabled=yes
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server lease
/ip dhcp-server network
add address=192.168.0.0/22 comment=defconf dns-server=192.168.0.5,192.168.0.3 \
gateway=192.168.0.1 netmask=22
/ip dns
set allow-remote-requests=yes servers=208.67.222.222,208.67.220.220
/ip dns static
add address=192.168.0.1 comment=defconf name=router.lan
/ip firewall address-list
/ip firewall filter
add action=drop chain=input comment="Block IP cameras from WAN access" \
src-address=192.168.1.121
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="Hairpin NAT" dst-address=\
192.168.0.0/22 out-interface=bridge src-address=192.168.0.0/22
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment="openvpn port forward" \
dst-address-list=WAN-IP dst-port=19847 protocol=udp to-addresses=\
192.168.0.161 to-ports=19847
/ip route
add disabled=yes distance=1 gateway=192.168.10.1
add check-gateway=ping distance=1 dst-address=192.168.229.0/24 gateway=\
192.168.0.161 pref-src=192.168.0.161
/system clock
set time-zone-name=America/Toronto
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN