Trying to script out a base "Golden Config" that will work on all my customer routers which leaves ether1 (WAN) out of the bridge but adds all other ether* interfaces to the bride regardless of if it is a 5 port (hAP AC) or a 10 port (RB4011) if anyone could help me out that would be awesome!!
Below is a base add of ehter2-ether10 for a RB4011
/interface bridge port
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether2
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether3
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether4
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether5
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether6
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether7
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether8
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether9
add bridge=bridge1 disabled=yes ingress-filtering=no interface=ether10