I was trying to setup Proton VPN with Wireguard on my hAP ac2, (which I've recently upgraded to v7.8) following this guide: https://protonvpn.com/support/wireguard ... k-routers/
After issuing this command
Code: Select all
/ip/route/add routing-table=protonvpn_wg dst-address=0.0.0.0/0 gateway=protonwg01 comment="ProtonVPN Wireguard default route"
The router still assigns an IP address to the machine I connect to it with a cable, but there is no internet access on that machine.
Any tips on how to even start debugging this, I have no other devices running RouterOS from which I could access the router via the MAC address.
Thanks a lot.