Hey guys!
i'am newbie in mikrotik, but i cant understand my disconnecting device issue, look here-
https://prnt.sc/Ghf2EVn_izWo
can anybody explain me why?
to be easily read.
# mar/31/2023 19:33:49 by RouterOS 7.8
# software id = D80Q-HRRT
#
# model = C53UiG+5HPaxD2HPaxD
# serial number = HDF08JCC20B
/interface wifiwave2
set [ find default-name=wifi1 ] channel.band=5ghz-ax .skip-dfs-channels=\
10min-cac .width=20/40/80mhz configuration.country=Poland .mode=ap .ssid=\
testMT_5 disabled=no security.authentication-types=wpa2-psk,wpa3-psk
set [ find default-name=wifi2 ] channel.skip-dfs-channels=10min-cac \
configuration.country=Poland .mode=ap .ssid=testMT_2.4 \
security.authentication-types=wpa2-psk,wpa3-psk
Try with "Disable PMKID" on.
Forget network from both phones, register once again and see if the problem re-appears.
Still same, after 15 mins disconnected, now i connected android phone, and same problemTry with "Disable PMKID" on.
Forget network from both phones, register once again and see if the problem re-appears.
okay i did that, i will let you know how its the status about it tommorow thanks for reply buddy
22:36:32 wireless,info 44:18:FD:A9:3E:D6@wifi1 disconnected, connection lost, signal strength -42
22:36:39 wireless,info 44:18:FD:A9:3E:D6@wifi1 connected, signal strength -44
Add wifi to your log. The reason might be just shown in there
/system logging add topics=debug,wireless
I suspect your issue is related because changes usually cause radio to restart. I would also try keep both radio’s on the same SSID and don’t disable PMKID which is used for roaming. After 7.9 stable release I’m hoping to see a bit more stability in wifi with hAP ax3 and WifiWave2 devices in general.*) wifiwave2 - fixed 802.11r roaming for clients that performed initial authentication with an AP which has been restarted since