Hi
I have a CRS326-24G-2S+RM switch with RouterOS ver. 6.48.6. My current setup is as follows.
A pfsense machine with 4 ports igb0, igb1, igb2, igb3.
Ig0 is being used for WAN. From igb1 there is a physical connection with the first port of the switch ether1 and through there
every device gets the private network ips like 192.168.10.0/24 network. Recently I created
2 VLANS lets say VLAN10,VLAN20 and via the igb2 interface of pfsense and through a physical
connection, it connects to port 18 of the switch (ether18).
If I tag port 18 with vlan10 and vlan20 and untag each of the vlans to a different port it plays ok.
What I am trying to accomplish though is somehow to connect switch to a unifi access point and from there transfer those vlans
(10 and 20). I thought the only thing I need to do is create a mirror port of the trunk port 18
lets say 17 and afterwards just connect that port (17) to the access point. From there
I have already created the appropriated vlans. Well It doesn t play, but if I connect directly that
igb2 of pfsense and bypass the switch at all to the access point, it understands both vlans.
So my questions are
1.How to accomplish this via the switch (I need to do it with they way I describe and not pfsense ->AP way directly)
2.Why it gives the ability for only one port to be mirrored? Switch->Switch 1->and there
specify Source and Target ports. After that no other ports can be mirrored. Even that doesn t work.
3. I ve read somewhere that the option Switch all ports (inside the switch1 menu) is just a way for ether1 to participate
on the mirror or not but I don think I need this for my specific use case scenario right now.
Any help would be highly appreciated since I am trying for this almost a week. Microtik guides on net
not an easy thing to find.
Thank you in advance