Code: Select all
[admin@MikroTik] /ip upnp> print
enabled: yes
allow-disable-external-interface: yes
show-dummy-rule: no
[admin@MikroTik] /ip upnp> interfaces
[admin@MikroTik] /ip upnp interfaces> print
Flags: X - disabled
# INTERFACE TYPE FORCED-EXTERNAL-IP
0 bridge-local internal
1 ether1-gateway external
and here's the test from command prompt: ~> upnpc -l
upnpc : miniupnpc library test client. (c) 2005-2013 Thomas Bernard
Go to http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/
for more information.
List of UPNP devices found on the network :
desc: http://192.168.0.254:2828/gateway.xml
st: urn:schemas-upnp-org:device:InternetGatewayDevice:1
Found valid IGD : http://192.168.0.254:2828/upnp/control/wanipconn-1
Local LAN ip address : 192.168.0.191
Connection Type : IP_Routed
Status : Connected, uptime=83343s, LastConnectionError : ERROR_NONE
Time started : Thu Jul 31 17:46:51 2014
MaxBitRateDown : 10000000 bps (10.0 Mbps) MaxBitRateUp 10000000 bps (10.0 Mbps)
ExternalIPAddress = 0.0.0.0
i protocol exPort->inAddr:inPort description remoteHost leaseTime
0 TCP 0->0.0.0.0:0 'Dummy inactive rule for windows to work' '' 0
GetGenericPortMappingEntry() returned 713 (SpecifiedArrayIndexInvalid)
~>
Is it correct for the dummy rule to still appear?
How can I delete it?