Hi,
Can we get support for ovpn-server in vrf. This was working somehow on 6.xx but not with vrf implementation on 7.x
Internet->ovpn-server IP address on vrf (not on main table)
Thanks!
No vrf settings below
[Home-MikroTik4011] /interface/ovpn-server> /system/routerboard/print
routerboard: yes
model: RB4011iGS+5HacQ2HnD
revision: r2
firmware-type: al2
factory-firmware: 6.45.8
current-firmware: 7.9
upgrade-firmware: 7.9
[MikroTik4011] /interface/ovpn-server> server/print
enabled: no
port: 1194
mode: ip
protocol: tcp
netmask: 24
mac-address: FE:60:59:B9:A3:3B
max-mtu: 1500
keepalive-timeout: 60
default-profile: default
certificate:
require-client-certificate: no
tls-version: any
auth: sha1,md5
cipher: blowfish128,aes128-cbc
reneg-sec: 3600
redirect-gateway: disabled
enable-tun-ipv6: no
tun-server-ipv6: ::
ipv6-prefix-len: 64