Hi,
I'm experiencing an issue with my CCR1009-7g-1c-1s+pc and a 1Gb SFP. There's an active link on the dedicated SFP+ port, but no traffic passes the interface (hard configured speed of 1Gb). When the transceiver is used on the combo port (SFP / eth0) the connection to my ISP is working fine.
In my opinion the SFP module should work on the SFP+ port or am I missing something?
SFP: 1000BASE-BX BiDi SFP 1310nm-TX/1550nm-RX 20km DOM Simplex LC/SC SMF Transceiver Module
RouterOS: 7.9