I meet the internet with Vlan on crs switch. Under this vlan, I have AP devices on switch ports through other vlans. CPU increases when vlan is added to Brigde. I need to edit this with vlan filtering but I couldn't.
As an example, I am posting the CCR device setting that sends VLAN below.
-CCR-
Code: Select all
/interface vlan
add interface=sfp-sfpplus1 name=VLan-10 vlan-id=10
add interface=VLan-10 name=AP1 vlan-id=20
add interface=VLan-10 name=AP2 vlan-id=21
Code: Select all
/interface vlan
add interface=sfp-sfpplus1 name=vlan1 vlan-id=10
/interface bridge add
name=bridge1
/interface bridge port
add bridge=bridge1 interface=vlan1
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2