Community discussions

MikroTik App
 
Mor
just joined
Topic Author
Posts: 5
Joined: Thu Nov 09, 2023 8:17 am

Another won't connect to the internet problem

Thu Nov 09, 2023 8:30 am

I'm genuenly stumped. I got a hAP ax3 router, booted it up with default config, set a static IP and the local IP i need, set up port forwarding for a few devices and whatever i try, it just wont connect me to the internet. What did i miss?
This is the config:
# jan/02/1970 00:30:19 by RouterOS 7.8
# software id = 11DN-3JX7
#
# model = C53UiG+5HPaxD2HPaxD
# serial number = <serial>
/interface bridge
add admin-mac=78:9A:18:2C:99:1D auto-mac=no comment=defconf name=bridge
/interface wifiwave2
# must specify passphrase for PSK
set [ find default-name=wifi1 ] channel.skip-dfs-channels=10min-cac \
    configuration.mode=ap .ssid=MikroTik-2C9921 disabled=no \
    security.authentication-types=wpa2-psk,wpa3-psk
# must specify passphrase for PSK
set [ find default-name=wifi2 ] channel.skip-dfs-channels=10min-cac \
    configuration.mode=ap .ssid=MikroTik-2C9922 disabled=no \
    security.authentication-types=wpa2-psk,wpa3-psk
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/ip pool
add name=dhcp ranges=192.168.1.105-192.168.1.248
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wifi1
add bridge=bridge comment=defconf interface=wifi2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.1.1/24 comment=defconf interface=bridge network=\
    192.168.1.0
add address=81.XX.XX.XX/24 interface=ether1 network=81.XX.XX.0
/ip dhcp-client
add comment=defconf disabled=yes interface=ether1
/ip dhcp-server lease
add address=192.168.1.198 comment=KAMERUSRV mac-address=1C:6F:65:53:72:BA
add address=192.168.1.208 comment=NEW mac-address=E0:3F:49:16:6A:B3
add address=192.168.1.139 comment=AND mac-address=E0:3F:49:16:6B:09
add address=192.168.1.140 comment=W10 mac-address=04:D9:F5:80:91:83
add address=192.168.1.132 comment=KAM_SERVER mac-address=C0:25:A5:8F:CB:C5
add address=192.168.1.175 comment=AXIS mac-address=B8:A4:4F:08:F3:41
add address=192.168.1.104 comment=PRINTER mac-address=00:17:C8:0D:BD:B7
/ip dhcp-server network
add address=192.168.1.0/24 comment=defconf dns-server=192.168.1.1 gateway=\
    192.168.1.1 netmask=24
/ip dns
set allow-remote-requests=yes servers=212.59.1.1,212.59.1.1
/ip dns static
add address=192.168.1.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
    "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
    in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
    ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
    ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
    "defconf: accept established,related, untracked" connection-state=\
    established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid
add action=drop chain=forward comment=\
    "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
    ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment=kasa dst-address=81.XX.XX.XX \
    dst-port=10097 in-interface-list=all protocol=tcp to-addresses=\
    192.168.1.126 to-ports=10097
add action=dst-nat chain=dstnat comment=rdp dst-address=81.XX.XX.XX dst-port=\
    3389 in-interface-list=all protocol=tcp to-addresses=192.168.1.198 \
    to-ports=3389
add action=dst-nat chain=dstnat comment="cam web" dst-address=81.XX.XX.XX \
    dst-port=81 in-interface-list=all protocol=tcp to-addresses=192.168.1.198 \
    to-ports=81
add action=dst-nat chain=dstnat comment="cam 8000" dst-address=81.XX.XX.XX \
    dst-port=8000 in-interface-list=all protocol=tcp to-addresses=\
    192.168.1.198 to-ports=8000

/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=\
    icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
    33434-33534 protocol=udp
add action=accept chain=input comment=\
    "defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
    udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
    protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
    ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
    ipsec-esp
add action=accept chain=input comment=\
    "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
    "defconf: drop everything else not coming from LAN" in-interface-list=\
    !LAN
add action=accept chain=forward comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid
add action=drop chain=forward comment=\
    "defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment=\
    "defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
    hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
    icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=\
    500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
    ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
    ipsec-esp
add action=accept chain=forward comment=\
    "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
    "defconf: drop everything else not coming from LAN" in-interface-list=\
    !LAN
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
Last edited by holvoetn on Thu Nov 09, 2023 11:53 am, edited 2 times in total.
Reason: Removed serial, added code quotes for readability

Who is online

Users browsing this forum: Airiasas, Pilo2710 and 16 guests