the load balancer of wiki don´t work i need some another load balancer for 4 wan
thanks
Re: load balancer
why doesn't it work?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!
For every complex problem, there is a solution that is simple, neat, and wrong.
MikroTik. Your life. Your routing.
For every complex problem, there is a solution that is simple, neat, and wrong.
MikroTik. Your life. Your routing.
Re: load balancer
andycrazy -
Posting the wiki loadbalancer doesn't work is not very helpful in determining what can be done to help you out.... You need to be a little more specific.
Posting your config would help a lot to determine where you went wrong. Also your goal with using a loadbalancer, such as failover required yes/no, or are you balancing certain kinds of traffic http out one gateway while VoIP goes out another, etc.....
Posting the wiki loadbalancer doesn't work is not very helpful in determining what can be done to help you out.... You need to be a little more specific.
Posting your config would help a lot to determine where you went wrong. Also your goal with using a loadbalancer, such as failover required yes/no, or are you balancing certain kinds of traffic http out one gateway while VoIP goes out another, etc.....
Thom Lawless
General Manager
RapidWiFi, LLC
thom.lawless [at] rapidwifi.com
General Manager
RapidWiFi, LLC
thom.lawless [at] rapidwifi.com
Re: load balancer
hey at least not for me or i guess so,, all load balance with fail over i ever seen in this post treat equal,, 1 2 3 or more conections with statics and privates ip's on wan sides but.... i have 2 adsl modems trhowing public and dynamics ips to my nics card on my mikrotik so..
how can i do load balance with fail over with this scenario?????
regards!!!
how can i do load balance with fail over with this scenario?????
regards!!!
Cuando la ignorancia se impone, la razon cordialmente cede el paso.