I've already read manual about Queue, Simple Queues, Burst, PCQ on wiki but I still confused about it, and I want to implement those QoS concept into my home network. Is it possible to activate or trigger a burst with PCQ?, at first I try to use simple queues with burst configured using default upload and download PCQ like this:
Code: Select all
/queue simple
add comment="default tx/rx pcq limitation"
burst-limit=10M/15M burst-threshold=5M/5M burst-time=16s/16s
limit-at=2M/2M max-limit=5M/10M name=orang-rumah-1
queue=pcq-upload-default/pcq-download-default target=wlan1
Does the PCQ work alongside with burst configured in simple queue like that? for example, if there is 5 client connected and 1 client get burst, does the burst itself effected only to that client or all the client on wlan1 got the same effect because they were in the same interface?
Second, I've try to create own customized PCQ types with the simple queue runs like this:
Code: Select all
/queue type
add kind=pcq name=pcq-download-custom pcq-burst-rate=15M
pcq-burst-threshold=5M pcq-burst-time=16s pcq-classifier=dst-address
add kind=pcq name=pcq-upload-custom pcq-burst-rate=10M
pcq-burst-threshold=5M pcq-burst-time=16s pcq-classifier=src-address
/queue simple
add comment="custom tx/rx pcq limitation"
limit-at=2M/2M max-limit=5M/10M name=orang-rumah-2
queue=pcq-upload-custom/pcq-download-custom target=wlan1
In this configuration I tested for speedtest but I don't see the client which I've tested get the burst rate. So, what is effected during pcq-burst process here? Or, is there a special way to do the test for result of the configuration itself?
The goal here's that I want my client on interface wlan1 got PCQ mechanism, but in the same time there's a burst works with it. Any idea how to do it? I'm currently learn with MikroTik especially on Quality of Service.
Thank you in advance
Regards.