Community discussions

MikroTik App
 
miko
just joined
Topic Author
Posts: 3
Joined: Wed Feb 01, 2023 8:05 pm

OSPF asynchronous routing with two channels

Tue Jul 23, 2024 10:02 am

Hi,
There are 2 channels between the routers (GRE-tunnel).

1 router.
/routing ospf instance
add distribute-default=always-as-type-1 in-filter=ospf-in-gre name=ospf-gre out-filter=ospf-out-gre router-id=10.0.0.254
/routing ospf interface
add interface=gre-tunnel1 network-type=point-to-point
add cost=30 interface=gre-tunnel2 network-type=point-to-point
/routing ospf area
add area-id=1.1.1.1 default-cost=1 inject-summary-lsas=yes instance=ospf-gre name=area1 translator-role=translate-never type=nssa
2 router.
/routing ospf instance
set [ find default=yes ] redistribute-connected=as-type-1 redistribute-static=as-type-1 router-id=10.0.0.251
/routing ospf interface
add interface=gre-tunnel1 network-type=point-to-point
add cost=30 interface=gre-tunnel2 network-type=point-to-point
/routing ospf area
add area-id=1.1.1.1 default-cost=1 inject-summary-lsas=yes name=area1 translator-role=translate-never type=nssa
When the connection is lost, a switch occurs, but when the connection is restored, router 2 switches but router 1 (ABR) does not.
1.PNG
2.PNG
I have never encountered channel reservation in OSPF before and I don’t understand why this behavior occurs.
You do not have the required permissions to view the files attached to this post.
 
miko
just joined
Topic Author
Posts: 3
Joined: Wed Feb 01, 2023 8:05 pm

Re: OSPF asynchronous routing with two channels

Wed Jul 24, 2024 4:39 pm

Maybe someone will help, or someone will express their thoughts, at the moment it worked as it should, but I had to change the zone type to default.
It didn’t work in the NSSA zone. Problem with asymmetric routing with only default route. The rest of the networks worked correctly during distribution.

Who is online

Users browsing this forum: No registered users and 6 guests