Community discussions

MikroTik App
 
User avatar
Ikatsu
just joined
Topic Author
Posts: 16
Joined: Thu Jan 08, 2009 11:00 am
Location: Spain

Devices discovered disappear from the map

Thu Jan 08, 2009 11:23 am

Hi to all,

I have a problem with the discover feature on the Dude v3.0. When I put an IP range to discover (for example 10.65.0.0/24), the Dude starts to scan all the range, and the devices in this range start to appear in the map, but disappear in a few seconds.

This is the configuration of the discover:

Image

The program is working in a Dell Optiplex server running under WinXP Pro SP2.

Do you have any idea about this problem?

Many thanks in advance.
 
User avatar
znet
Member Candidate
Member Candidate
Posts: 134
Joined: Mon Jul 24, 2006 8:07 pm
Location: Houston, Texas

Re: Devices discovered disappear from the map

Tue Feb 10, 2009 6:12 am

Has 'Discovery' ever been useful after, at most, the first time?

Once you run it and find the majority of devices on the network, add the new ones manually. If you dont, for whatever reason it cant find a device it previously found, of course it will erase a device it thinks no longer exists....Discovery is dangerous for that reason...

Discovery has always seemed to behave this way...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24664
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Devices discovered disappear from the map

Tue Feb 10, 2009 2:26 pm

I think the OP said that Dude shows the device on the initial scan, but after scan progresses (the same scan) the device disappears. it could be because you have unchecked "add serviceless"
No answer to your question? How to write posts
 
User avatar
Ikatsu
just joined
Topic Author
Posts: 16
Joined: Thu Jan 08, 2009 11:00 am
Location: Spain

Re: Devices discovered disappear from the map

Thu Feb 12, 2009 6:27 pm

This is the problem I have, I tried to check "Add serviceless", but the result is the same:

Image
 
User avatar
blackpaw
newbie
Posts: 37
Joined: Thu Jan 28, 2010 7:19 pm
Location: Amsterdam, NL

Re: Devices discovered disappear from the map

Tue Apr 12, 2011 5:33 pm

bumping this thread:

I have had this too - according to me this is when it happens:

- Create a new device and/or assign a device to a device group
- select autodiscover (or configure automatic discovery) but exclude this device group from being discovered
- the Dude then removes it as it was not meant to be discovered (Mikrotik logic?)

re-produced this yesterday and today.

Correct me if I am wrong. :)


Andreas
life is one of the hardest

Who is online

Users browsing this forum: No registered users and 72 guests