Yes it is, I've tested it and it works like a charm
1. DHCP Security: Add ARP for Leases
So that each device can only be connected by allocating the IP Address from the DHCP Server, we need to activate the 'Add ARP for Leases' option. The trick is to double click on the DHCP Server and check the option which is located at the bottom.
In addition, on the router interface where the DHCP Server is located, we change the 'ARP' parameter with the 'reply-only'
option. This is intended so that the router will not automatically update the ARP List table when a client is connected using a Static IP Address.
The above settings will make the router only allow interconnection of clients who get the IP address from the DHCP process. Users who set the IP address manually are not able to interconnect to the router.
2. DHCP Security: Adress Pool Static Only
Furthermore, by using the 'Add ARP for Leases'
parameter like the configuration above, we can also limit the devices connected via the DHCP Server to only the devices that we have specified. For this need, you can set the parameters on the DHCP Server, namely the Address Pool, by setting it to the 'Static-Only'
However, first we have to register the devices that are allowed to connect to the Static Leases list. For the addition itself, you can select the IP menu -> DHCP Server -> Leases tab ->
Click Add [+]
Once added, we can see a list of these devices in the Leases Tab.
Next, we will set the Address Pool parameter to 'Static-Only'. For the settings, you can click twice on the existing DHCP Server and select the Address Pool parameter.
source : here