one of our customers needs a 20Mbps full-duplex point to point link, in this case nstreme2 (Dual Nstreme) is the way to go. Therefore we use two 433AH rbs with four AR5006X 802.11abg cards and four antennas.
The ros bandwidth test show 40 Mbps if tcp and both is used, which exceeds the needed bandwith.
Code: Select all
Antenna Type: Airwin 19 dB (5100 - 5900 MHz) Horizontal The link is very good: Rx Signal Strength: -54 dBm Tx Signal Strength: -56 dBm Tx/Rx Rate: 54M/54M Tx Band: 5580 MHz Rx Band: 5320 MHz Framer policy: best fit Framer limit: 4000
After some days of testing the customer told us that they had experienced low throughput with small packets (64 bytes). They did their tests with a RFC ethernet tester (EXFO 200).
Does anybody know how we can improve the throughput of small packets?
tnx in advance