I am a new member of this forum, greetings to all members of the forum introduction mikrotik.
I wanted to ask about the hardware rb433
I have four units rb433, everything has been my life since a year ago,
each unit is rb433 I filled with two mini-pci radio unit is a unit senao engenius 200 mW and 350 mW Mikrotik R52H
during the first year all the tools to walk normal and stable as ap-bridge
but at this time all have problems, namely:
if the first mini-pci is distributing the mini-pci data both traficnya has decreased, even drop to zero kbps
efforts I have done is replace all the mini-pci but the problem still occurs.
then I did a hardware reset rb433 and re-setting, but the problem still occurs.
requested the help of information, what should I do?
or indeed rb433 appliance must be replaced because it had dropped its quality because it has been used during the first year?

thanks

"sorry I have been wrong to write"
rb411 at the time I wrote before, the truth is rb433
I have changed now
sorry

Hello,

if you can use 2 minipci in the 411, tell me how!
It's not possible to fit 2 minipci in the 411, it has only one minipci slot.

If it's a RB433, it's possible, but tell us exactly what's the problem with your configuration please to let us help you.

Thanks,

"sorry I have been wrong to write"
rb411 at the time I wrote before, the truth is rb433
I have changed now
sorry

Be sure you power adapter is 24VDC instead of 12VDC