are we suppose to add the dhcp server onto a physical interface or the vlan interface or a bridge?How/what is the dhcp server ip address?
This is basically what i am trying to do
Ether1 (master port = none) - attached to modem
Ether2 (master port = none) - vlan10
Ether3 (master port = none) - vlan10
/interface vlan add name=vlan10_e2 vlan-id=10 interface=ether2 disabled=no add name=vlan10_e3 vlan-id=10 interface=ether3 disabled=no
If a client machine is plugged into ether3 or 2, they should get an ip address from the dhcp server within vlan10
any help would be appreciated... these vlans are driving me crazy