I have a problem with IPSEC. When I enable an IPSEC tunnel on one of my routers, all access to the addresses set at source address in the IPSEC policy is lost. The IPSEC tunnel is working find and routing traffic, but I cannot ping, ssh, or get any kind of connectivity to the routeros locally on Router B. All local connectivity is working just fine on Router A. If I disable the IPSEC policy on Router B, local traffic is restored. I have to connect to the WAN address on Router B to gain access to the router.
On RouterA I have the subnets 192.168.2.0/24, 192.168.3.0/24, 192.168.4.0/24.
On RouterB I have the subnet 192.168.1.0/24
I have the following IPSEC policies in place on RouterA:
0 src-address=192.168.0.0/16:any dst-address=192.168.1.0/24:any protocol=all action=encrypt level=require ipsec-protocols=esp tunnel=yes sa-src-address=126.96.36.199 sa-dst-address=188.8.131.52 proposal=default priority=2
And the following IPSEC policy in place on RouterB:
0 src-address=192.168.1.0/24:any dst-address=192.168.0.0/16:any protocol=all action=encrypt level=require ipsec-protocols=esp tunnel=yes sa-src-address=184.108.40.206 sa-dst-address=220.127.116.11 proposal=default priority=2
Any clues to what might be going wrong here?