Yes but this "new routing" was promised for RouterOS version 6 and yet IPv6 policy routingIPv6 policy routing requires rework of the routing so it will be possible to add this feature only after new routing comes out.
I can see there is the ability to add routing mark, however there is no "action" to "mark-routing" so that it is used.Look what I found in RouterOS v6.1.
ros codeipv6 firewall mangle add new-routing-mark=
I asked about route marking for IPv6 over 2 years ago and still no sign of it. http://forum.mikrotik.com/viewtopic.php ... 40#p225402 Fobbed off then and still being fobbed off now.
and still no sight or sound of what is fast becoming a deal-breaker for MT kit. We're now in the process of quoting for a rollout which must include IPv6 and are going to have to heavily caveat our proposal...I'd be grateful if MT could provide the merest hint of a timescale.
Yes, but my impression was that the goal was to balance the inbound traffic. The only way that would happen based on outbound load balancing is if the src address is natted to the egress interface. The other concern was redundancy, which can be handled in straightforward ways w/o PBR.OP wanted uplink Round Robin packet balancing.
/ipv6/firewall/mangle> add chain=prerouting connection-mark=C_PR_VPN action=mark-routing passthrough=no new-routing-mark=VRF-VPN