I would like to configure a PPTP VPN so that I may connect any machine I happen to be at (at home, etc., which may have any local or WAN IP) to my 192.168.1.0/24 network for troubleshooting and so on.
Let's assume that I want it to take a lease from the same pool as all the other machines, and use 192.168.1.1 as DNS too.
Here's what I've got. I am able to connect and auth to the PPTP server (from Mac OS X client, 10.0.1.0/24), but I can't reach any addresses on the target network other than 192.168.1.1 (RouterOS).
I'm not sure what I'm missing - just after a nudge in the right direction. I'm still learning about RouterOS.
Code: Select all
/interface pptp-server add name=pptp-admin user=admin /ip pool add name=dhcp_pool ranges=192.168.1.2-192.168.1.254 /ip dhcp-server add address-pool=dhcp_pool disabled=no interface=bridge1 lease-time=1d name=\ dhcp1 /ppp profile add address-list=0.0.0.0/0 bridge=bridge1 change-tcp-mss=yes dns-server=\ 192.168.1.1 local-address=dhcp_pool name=pptp-admin only-one=no \ remote-address=dhcp_pool use-compression=no use-mpls=no \ use-vj-compression=no /interface pptp-server server set authentication=pap,chap,mschap1,mschap2 enabled=yes /ppp secret add name=admin password=******** profile=pptp-admin routes=192.168.1.1 \ service=pptp