Hello,

I'm hoping you guys take this feedback seriously.

-Increase memory from 128 to 256
-Increase CPU speed from 600 to 680
-Ability to purchase LCD separate

I would be willing to pay more money for this!!!

Let`s made dream router for the heart.
CPU 1Ghz/Dual core
RAM 256
HDD 256
10 gigabit Ethernet ports
LEDs to flash/blink in different colors and to be small.
BIGGER touch screen.
3 expansion slots.
2 USB

CPU as fast as possible

the performance of this router is slowed by the switch chip of the second 5 ethernet ports (100mbit)
maybe increase somehow the gigabit ports to 7 or 8 and drop 100mbit ports

and put the shit power jack entrance at the outside of the case, now you can move the router without power cable/source

and put the **it power jack entrance at the outside of the case, now you can move the router without power cable/source

This is the biggest thing I would like to see changed. We also had one damaged out of the box. When the case got put on the board the wire had got pinched and cut. Luckily I had seen the bare copper before we installed it.

I bought the RB2011UAS-2HnD-IN already and am more than happy with it. My first Mikrotik device BTW.
As other already said, all 1 Gbit/s ports would be awesome. But what took me two days of thinking before then buying this thin is the single radio. I wanted to play with 5 Ghz so bad (since the ISM band is so packed with DECT and other WiFi routers).

So my wish would be:

- 5 Ghz WiFi (in addition to the 2.4Ghz and as 802.11n)

Deleted because not related.

Sorry I did not mean 10 Gbit/s but all 1 Gbit/s ports. In such a small device 10G is overkill.

As for 5 Ghz Wifi, I don't want USB devices with all external antennas. I like about the device that everything fits in the case and antennas are mounted to it.

Deleted because not related.

LEDs to flash/blink <- Only thing I want...

Dual Led Port Status would be much useful than TouchScreen at the back of case. But 100Mbit/sec SFP module compatiblity "must have" for such devices. 10Gbit module compatibility is overkill for such router. 750MHz overclock already available and tested. AR9344 has only 5 100Mbit/sec ports onchip so additional 5 gigabit ports will cost additional AR8237 chip.

LEDs to flash/blink <- Only thing I want...

LEDs to flash/blink <- Only thing I want...

Install v6.0rc6.

in my priority/charts:
1. four-core 800Mhz[1GHz ? even better!] CPU.
2. 512Mb RAM[or SO-DIMM slot].
3. SEND[NDP replacement] for both v4 and v6.
4. DNSCurve[DNSSec replacement]
5. two emerging NAT's for v6, starting from NAPT. and NAT-T for v4.
6. native I2P and GNUNet support.
7. dual-band 2x2 Wi-Fi.
8. mild IPS preset as part of "initial config".
9. full-size USB-port instead of Micro-USB.
10. B.A.T.M.A.N v3 routing support.

LEDs to flash/blink <- Only thing I want...

Install v6.0rc6.

but, it is software or hardware? because it was said in another post, the chip can not handle and does not support the blinking leds for activity.

i upgrade to 6.0 rc6 and that's right. the led blinking when port have traffic.

i upgrade to 6.0 rc6 and that's right. the led blinking when port have traffic.

basically i dreaming about able to config leds.
or turn them off, atleast :[
because those LED's quite BRIGHT for housing/premises. for work its quite Cool, sure.