I have problem to set "connection List" Signal Strength Limit setup.
For example, RB435G is not connected Antenna. And Two RB435G wireless connection is good to ping reply(indoor test). Received signal is -75dBm.
I set signal strength -90..-60 dBm in connect list and press ‘apply’ button, And client disconnected and no ping reply. It means Limitation is working well.
In that time, I install antenna and received signal is changed to -30dBm. So ping reply And I removed antenna and received signal is -75dBm.
But ping still reply well. I think it must be disconnected. So,,, I tried connection list ‘apply’ button again, and then ping disconnected.
I don’t know why only limitation work only ‘apply’ button.