Hello to all.

Can anyone help about pppoe client multilink..

I have add 2 interfaces which i have tested for receiving PADO.

But always it starts only one session and not in multilink.

Can anyone help me

Can anyone help me

It is very unlikely that anybody will be able to guess what your configuration is. I don't think you will get any sensible answers until you provide sample configurations, debug/log messages and possibly a network diagram.

Hello again,

I have 2 adsl modem in bridge mode and forward to 2 vlans.

I have 1 rb433GL and I've made 2 vlan interface.

Then I've made a PPPoE client with 2 interface (of vlan)

/interface pppoe-client
add ac-name="" add-default-route=no allow=pap,chap dial-on-demand=no disabled=\
no interface=Internet,sr_atm keepalive-timeout=60 max-mru=1448 max-mtu=1448 \
mrru=disabled name=ISP password=pass profile=default service-name=\
"" use-peer-dns=no user=user

You need to set the MRRU value.

http://wiki.mikrotik.com/wiki/Manual:ML ... iple_links

It doesn't say anything about MRRU..


This is example config.

/interface pppoe-client
add service-name=ISP interface=ether1,ether2 user=xxx password=yyy disabled=no \
add-default-route=yes use-peer-dns=yes