Community discussions

MikroTik App
 
zhex900
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 65
Joined: Mon Apr 15, 2013 5:34 pm

RB2011UAS-2HnD-IN Netinstall without serial cable

Mon Apr 28, 2014 4:30 am

Hi,

My RB2011UAS-2HnD-IN is stuck in "loading kernel". So I want to use netinstall to reinstall firmware. But I don't have a serial cable.

Is there a way to do netinstall without a serial cable. Should I use normal network cable in the serial port?

Jake
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB2011UAS-2HnD-IN Netinstall without serial cable

Mon Apr 28, 2014 9:15 am

you don't need serial cable to run netinstall. just follow instructions in the quick guide.
http://i.mt.lv/routerboard/files/rb2011 ... 085321.pdf
- Hold the button before powering on the device, and at power up, the button will force load the backup boot-
loader. Continue holding the button for the other two functions of this button:
**Release the button when green LED starts flashing, to reset RouterOS configuration. To not load backup boot-
loader, you can start holding the button after power is already applied
**Release the button after LED is no longer flashing (~20 seconds) to cause device to look for Netinstall servers
(required for reinstalling RouterOS over network)
 
zhex900
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 65
Joined: Mon Apr 15, 2013 5:34 pm

Re: RB2011UAS-2HnD-IN Netinstall without serial cable

Mon Apr 28, 2014 12:03 pm

Thank you for your reply.

Do I follow this instructions?
http://www.mikrotik.com.my/reinstalling ... rial-port/

I tried but the netinstall cannot find my router. I connect a cable in eth1 into a computer.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26322
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB2011UAS-2HnD-IN Netinstall without serial cable

Mon Apr 28, 2014 12:11 pm

Yes, those instructions will work also.

Make sure your Windows PC has Firewall and Antivirus turned off, and that you run Netinstall "As Administrator"
 
zhex900
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 65
Joined: Mon Apr 15, 2013 5:34 pm

Re: RB2011UAS-2HnD-IN Netinstall without serial cable [SOLVE

Mon Apr 28, 2014 1:25 pm

Thanks. It worked.
 
Ehman
Member
Member
Posts: 389
Joined: Mon Nov 15, 2010 10:49 pm

Re: RB2011UAS-2HnD-IN Netinstall without serial cable

Sat Nov 13, 2021 9:06 pm

Yes, those instructions will work also.

Make sure your Windows PC has Firewall and Antivirus turned off, and that you run Netinstall "As Administrator"
Ive got the same problem on my win7 machine, and Im not going to disable my antivirus... Mikrotik fix your software!!

Who is online

Users browsing this forum: ema81 and 22 guests