My Mikrotik router OS v.6.0 is setup as pptp server clients can remotely connect alright but my problem is after they are connected they cannot browse the net there is apparently no internet connection by then they still keep connected and not disconnected.
this is my router setup
>>Interfaces<<
[admin@MikroTik] /interface> print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 R LAN(With interNet ) ether 1500
3 R ;;; Seving as access Point For PPTP clients
Modem - Public IP ppp-out 1500
>>>DHCP for LAN<--internet on interface<<<
[admin@MikroTik] /ip dhcp-client> print
Flags: X - disabled, I - invalid
# INTERFACE USE ADD-DEFAULT-ROUTE STATUS ADDRESS
0 LAN(With interNet ) yes yes bound 192.168.78.102/24
>>POOL FOR PPTP USERS<<
[admin@MikroTik] /ip pool> print
# NAME RANGES
0 PPTP-Normal 10.0.0.1-10.0.0.254
>>>>FIREWALL<<<
[admin@MikroTik] /ip firewall nat> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade src-address=192.168.78.102
>>ROUTING TABLE<<
[admin@MikroTik] /ip route> print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 Modem - Public IP 1
1 DS 0.0.0.0/0 192.168.78.1 1
2 ADC 10.112.116.59/32 10.30.8.162 Modem - Public IP 0
3 ADC 192.168.78.0/24 192.168.78.102 LAN(With interN... 0
<<<DNS>>>
[admin@MikroTik] /ip dns> print
servers: 192.168.78.102
dynamic-servers:
allow-remote-requests: yes
max-udp-packet-size: 4096
query-server-timeout: 2s
query-total-timeout: 10s
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 9KiB