Today all mayor vendor provide support of 6VPE (VPNv6) on PE MPLS routers to garand the use of dual stack ipv4-v6. Now the market require the support of dual stack (ipv4,ipv6) under the same vrf.
On router OS we seen the mp-bgp doesn't support VPNv6 (6VPE) and ipv6 address family.
When it will be supported ?
Thanks
Isacco
CCIE SP #44988
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Most likely you will see this implemented in ROS v7.
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Any update on this issue?
-
-
joegoldman
Forum Veteran
- Posts: 767
- Joined:
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Normis says ROS v7 doesnt existMost likely you will see this implemented in ROS v7.
Sorry i kid i kid.
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Hi mrz, are the plans to implement VPNv6 in ROS v7 maintained?Most likely you will see this implemented in ROS v7.
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Is available since 7.15
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Have you tested it?
Re: Feature Request: 6VPE (VPNv6) - ipv6 address family
Glad to seeing it!
I testing it in the lab with CHR mesh network topology. I can set vpnv6 under bgp connections but nothing really happens:
There is no bgp activity under vpnv6. RoS7 Routing Protocol Status page indicating it is supported in 7.15 but 7.15 not yet released 
So I waiting.
I testing it in the lab with CHR mesh network topology. I can set vpnv6 under bgp connections but nothing really happens:
Code: Select all
[admin@rtr1.CPE] > /routing/bgp/connection/export
# 2024-04-25 04:18:12 by RouterOS 7.15rc1
# software id =
#
/routing bgp connection
add address-families=ip,l2vpn,l2vpn-cisco,vpnv4,vpnv6 as=65530 connect=no disabled=no listen=yes local.address=10.0.10.11 .role=ibgp-rr name=rrcl4 nexthop-choice=force-self \
output.default-originate=if-installed .redistribute=connected remote.address=10.0.10.0/24 .as=65530 router-id=10.0.10.11 routing-table=main
[admin@rtr1.CPE] > /routing/bgp/session/print where remote.address=10.0.10.14
Flags: E - established
1 E name="rrcl4-1"
remote.address=10.0.10.14 .as=65530 .id=10.0.10.14 .capabilities=mp,rr,gr,as4 .afi=ip,l2vpn,l2vpn-cisco,vpnv4 .messages=18 .bytes=933 .eor=""
local.role=ibgp-rr .address=10.0.10.11 .as=65530 .id=10.0.10.11 .capabilities=mp,rr,gr,as4 .afi=ip,l2vpn,l2vpn-cisco,vpnv4 .messages=27 .bytes=4307 .eor=""
output.procid=20 .default-originate=if-installed
input.procid=20 ibgp
nexthop-choice=force-self multihop=yes hold-time=3m keepalive-time=1m uptime=6m15s130ms last-started=2024-04-25 04:12:08 prefix-count=11